Situational solution and approaches
The residential buildings are located in two adjacent plots: UPI XVIII -1640, with an area of 1841 m2 and UPI XXIII - on an area of 1165.23 m2. They are bordered to the south and east by a street, and to the west and north by other properties. 4 single-family three-story residential buildings are located freely in the first plot, and in the second - 1 multi-family, four-story residential building. .
Building "A1" and Building "A2" (mirror) are residential buildings with two single-family homes, which have a common wall and a separate entrance. Buildings "B1" and B2" are identical and represent residential buildings, each with two single-family dwellings, which have a common wall and a separate entrance.
The development is situated within the limits of the restrictive development lines. The main approaches for cars and for access to the buildings are from the east.
Volumetric planning decision
Single-family residential buildings
Each apartment has the following level distribution:
- elevation + 0.00, -0.45: entrance hall, living room with dining room and kitchen, WC
- elevation +2.80: two bedrooms and two bathrooms (as for buildings "B1" and "B2" - three bedrooms)
- elevation +5.70: study, storage and bathroom
Materials for surface treatment and shaping of the facades
The construction is traditional - monolithic reinforced concrete with ensured thermal insulation. The roof is flat.
Color solution - white and gray mineral plaster; Al joinery - graphite color; stone cladding - "acorn masonry" type; ventilated facade system CW40 color Winchester. The parapet of the terraces is made of glass.
All characteristic terrain elevations are shown in the situation.
There are a total of 12 parking spaces in the lot.
